Fully Automatic SMT Juki High Speed Pick And Place Machine Juki Pick And Place Machine Juki RS-1R LED Chip Mounter
Product description
The consistent further development of the tried-and-tested
technologies from the RS-1R opens up new, outstanding
possibilities:
Even faster assembly of smallest chips (0201 metric) up to large
components of 50 x 150 mm or 74 mm edge length for square
components. The base frame of the RS-1R has been completely
redesigned for this purpose.
The unique Takumi head covers even more different component heights
and thus achieves a decisive speed advantage. The 360° visual
component recognition allows the secure detection of user-specific
polarity marks.
Thanks to the RFID integration in the nozzles, these can be traced
back completely together with the components and boards.
The machine combines the features of a chip shooter with a mounter
for large components. The purchase of each special machine type for
it eliminates as well as a change of the placement head.
Product specification
| Model | RS-1R |
| Transport style | Standards | 150 mm extension at inlet and outlet | 250m extension at entrance and exit |
| Dimension of substrate | Minimum | 50×50mm |
| Maximum | 1 buffer time | 650×370mm(One time splint) |
950×370mm
(Splint twice) | 1,100×370mm
(Two time splint) | 1,200×370mm
(Two time splint) |
| 3 buffer time | 360×370mm | 500×370mm | 600×370mm |
| Maximum height of the component | 25mm |
| Dimensions of components | 0201(:008004)~074mm/50×150mm |
| Component mounting speed (best condition) | 47,000CPH |
| Accuracy of component placement | ±35μm(Cpk≥1) |
| Type of component placement | Up to 112 types |
| Power Supply | Three phases AC200～415V*3 |
| Rated power | 2.2 kVA |
| Use air pressure | 0.5±0.05 MPa |
| Using air flow | When using the vacuum generator: 200 per minute (standard), when
using the vacuum pump: 50 per minute (OP) |
| Dimensions (W × D × H) ° 4 | 1,500×1,810×1,440mm | 1,800×1,810×1,440mm | 2,000×1,810×1,440mm |
| Weight | About 1,700 kg |
Product details
1: Flexible red laser, high-speed placement according to component
size device laser_height
2: Flexible vcs camera, can be raised and lowered to ensure
recognition accuracy and accuracy
3: nozzle micro change, then optimize the concentration on the
previous nozzle, achieve efficient placement, can prevent damage
nozzle
4: The most important point: according to the product optimization,
according to the product type, you can actually 20000-30000cph/h,
especially for mobile phones, fpc, wearable, military products,
etc., to achieve the most perfect placement.
5: The design of the head is user-friendly, the board is
concentrated and integrated, and the laser becomes lighter. It has
obvious design than all previous head designs.
Why choose JUKI pick and place machine?
1, the versatility of JUKI pick and place machine: JUKI pick and
place machine models have different types of different use
advantages, the machine has a specific type and multi-function, the
specific type of production speed will be relatively faster,
Because he only limits the production of one. In order to meet the
orders of many companies, they have launched a multi-functional
machine to meet the needs of enterprises.
2, JUKI pick and place machine is simple to operate: the biggest
advantage of the JUKI brand is that his operation is simple, the
circuit and structure of many pick and place machines are more
complicated, but the structure of JUKI pick and place machine is
very simple.
3, JUKI pick and place machine is cheap: the function is reduced to
the minimum required, while ensuring higher productivity and small
size and light weight at a lower cost. The latest laser recognition
system is used in the same way as the most advanced models.
Identification method:
Laser and CAMERA recognition, small components are directly
recognized by the laser and recognized by the camera. High speed
and accurate.
The laser can identify the height of the component. The vertical
recognition method will not affect the pick and place quality due
to the whiteness of the nozzle or the presence of other dirt.
After the working head picks up the components, it moves directly
to the placement of the components, won't do placing if missing
components on the way.
The laser recognizes the whole tracking component, and there is no
vertical material or component that is not loaded with the
material. The automatic identification does not carry out the next
feeding. Whether it is placed or not, it can be traced all the way.
If the material is picked up or not.
The laser can identify the height of the component, and the AC
servo motor can automatically control the placement height and
strength, eliminating the breakdown of the components in the
placement, while reducing the impact force and friction of the
nozzle, and prolonging the service life of the nozzle (1-3) year).
Placement method:
The use of vacuum pressure to break the timing of the
self-calibration function prevents the components from being
brought back at the moment of patching.
high density:
It does not affect the adjacent components when placed.
