Desktop Bench top three zone Reflow Oven SMT Soldering Machine Smt Machine Three zone Small Reflow soldering
Product Introduction
Three-temperature bench hot air reflow soldering
Temperature control precision: with three independent temperature
control zone, the temperature can be controlled within ± 2 °C,
there is a cooling zone. And the temperature controller can monitor
the furnace temperature of the temperature zone at any time.
High heating efficiency: 3 temperature zone with two 0.65 kw
far-infrared heating tube, and with mirror reflector, infrared
reflection evenly distributed, high heating efficiency.
Energy-saving: the liner adopts double-layer steel structure,
filled with high-efficiency thermal insulation material,
heat-resistant and corrosion-resistant, effectively reduce power
consumption and achieve energy saving.
Uniform heating: using forced convection to completely eliminate
the shadow effect, forced hot air system, with high-efficiency heat
storage device (high-temperature body heat storage metal material)
, can make a variety of SMC/SMD components heated evenly and
reliably.
High welding quality: equipped with microcomputer PID intelligent
adjustment temperature controller, welding can reach international
IPC standards.
Good cooling effect: the cold air in the cooling temperature zone
is directly blown to the welding surface, so that all kinds of SMD
components are cooled evenly.
Smooth driving: the driving MOTOR adopts AC frequency conversion
stepless speed regulation MOTOR and 1150 turbine reducer, with
accurate adjustment and balanced driving. Mesh belt with roller
structure, running smoothly and can work for a long time
Product Specification
Model | HXT-H330A |
Heating Part Parameters |
Number of heating zones | up 3 down 0 |
Heating zone length | 1000mm |
Heating method | Full hot air |
Number of cooling zones | 1 |
Conveyor Parameters |
PCB board width | 300mm |
Shipping direction | left → right |
Conveyor belt height | 350±20mm |
Transmission method | Network drive |
Conveyor speed | 0-1200mm/min |
Control Section Parameters |
Power supply | 5-wire 3-phase 380V single-phase 220V 50/60Hz |
Starting power | 6KW |
Normal working power consumption | Approx.1.5KW |
Heating time | About 15 minutes |
Temperature control range | Room temperature -310°C |
Temperature control method | PID closed-loop control, SSR drive |
Temperature Control Accuracy | ±1℃ |
PCB board temperature distribution deviation | ±2℃ |
Abnormal alert | Abnormal temperature (ultra-high temperature or ultra-low
temperature after constant temperature) |
Body Parameters |
Dimensions | L1500×W500×H650 |
Weight | Approx.80Kg |
Product details
