Multi Blades V-cut Pcb Separator Cutting Machine HXT-720 LED Board
PCB Automatic Depanelizer PCB Router Machine
Standard Equipment Introduction
Features:
1. Using a unique cutting method, circuit board cutting is
completed by six blades, and the upper and lower blades form a
group to form a cutting unit. They are A, B, C, three groups. The
whole cutting process is divided into three stages. The blades of
group A first cut 40% of the circuit board, and then the blades of
group B run over the groove cut by blade A again, completing 40% of
the cutting volume again, and finally the blades of group C cut the
final 20% of the cutting and smoothing, because the amount of
cutting each time is small, the stress generated during the cutting
process is reduced by more than 80% compared with the traditional
one-time cutting method. The edge of the divided circuit board is
smooth and smooth, and the surface of the board is very smooth, not
twisted or warped. It is currently the only machine on the market
that can guarantee that the aluminum substrate will not be deformed
after cutting
2. Due to multiple cuts, the cutting process is very stable, which
greatly improves the positioning ability of the V-CUT groove. Even
if the V-CUT groove is very shallow on the circuit board, the V-CUT
groove will not jump out of the guide knife. Circumstances to avoid
defective products.
3. All cutting blades are calibrated with a laser dual-frequency
laser interferometer to ensure that the back knife can accurately
continue cutting in the groove cut by the front knife. The runout
of the knife tip is not more than 0.02mm to ensure perfect cutting
quality.
4. A stainless steel platform with laser scale positioning function
can be added (1.2m or 2.4m optional)
Product Specification
Host size: | 325mm*385mm*350mm |
Plus platform size: | 1200 x 506x 350 (1.2M) Weight: 9KG |
2400 x 506 x 350 (2.4M) Weight: 17KG |
Maximum sub-board length: | Unlimited |
Splitting speed: | 80, 120, 200, 400mm/sec |
Power: | 60W |
Tool material: | SKD61 high speed steel |
Board thickness: | 0.2-3mm |
Machine weight: | 1.2M—41KG; 2.4M—49KG |
Product details
HXT-720 Application:
Using a unique cutting method, circuit board cutting is completed
by six blades, and the upper and lower blades form a group to form
a cutting unit. They are A, B, C, three groups. The whole cutting
process is divided into three stages. The blades of group A first
cut 40% of the circuit board, and then the blades of group B run
over the groove cut by blade A again, completing 40% of the cutting
volume again, and finally the blades of group C cut the final 20%
of the cutting and smoothing, because the amount of cutting each
time is small, the stress generated during the cutting process is
reduced by more than 80% compared with the traditional one-time
cutting method. The edge of the divided circuit board is smooth and
smooth, and the surface of the board is very smooth, not twisted or
warped. It is the only machine on the market that can guarantee
that the aluminum substrate will not be deformed after cutting.
a. Mainly used in electronics, electrical appliances, lighting,
medical, new energy vehicles, automobiles and other electronic
technology industries.
Applications:
Widely used in electronics manufacturing, consumer electronics,
automobile electronics, communications equipment, aerospace,
medical equipment, LED lamps, computers and peripherals, smart
home, smart logistics, miniature and high power ratio electronic
devices.
