Automatic PCB Cutter PCB Separator V Groove Cutting Machine Multi
Blade Moving Cutter LED Strip Cutting Machine Guillotine Type Pcb-v Cut Machine
Standard Equipment Introduction
Advantage:
The traditional knife-type depaneling machine needs manual board
placement and positioning, which is time-consuming and laborious,
and the production efficiency is not high. However, this equipment
has been upgraded on the original knife-type depaneling machine. It
is controlled by a microcomputer and can be adjusted according to
the size of the PCB board. Set a single cutting stroke without
manual positioning, and it can also be connected to the loading
machine, which saves labor, improves the efficiency of board
separation, and has a higher degree of automation. 2. Due to
multiple cuts, the cutting process is very stable, which greatly
improves the positioning ability of the V-CUT groove. Even if the
V-CUT groove is very shallow on the circuit board, the V-CUT groove
will not jump out of the guide knife. Circumstances to avoid
defective products.
Features:
Using microcomputer technology, the program can automatically
control the cutting times and cutting stroke, the board width:
58mm-320mm, PLC control, can store 100 sets of data; The distance
between the upper round knife and the lower straight knife can be
adjusted accurately, and the gap adjustment space between the upper
and lower knife wheels is 0-15mm; High-tech feeding facilities,
without manual operation, reserved ports for external manipulators;
With automatic counting function, intuitively display output; The
machine is driven by a stepping motor, it can be unlocked when it
is powered on, and it can be positioned precisely, which solves the
problem of changing the travel point of the DC and AC motors after
working for a period of time due to inertia; This model is the
working mode of extended feeding, which can be directly extended to
the inspection line through the conveyor belt after the PCB is cut.
Product Specification
Machine Specifications: | 1040*900*1110 |
Maximum sub-board length: | 350mm |
Maximum panel width: | 200mm |
Bottom component height limit: | 15mm |
Tool material: | Imported high speed steel |
Board thickness: | 0.5-3mm |
Gas source: | 4-6KGF/cm2 |
Power supply: | Power supply: 220V/110V, 50HZ/60HZ, 60W |
Product details
HXT-505 Application:
This equipment has been upgraded on the original knife-type
splitting machine. It is controlled by a microcomputer, and a
single cutting stroke can be set according to the size of the PCB
board. It does not need manual positioning. It can also be
connected to the board machine, saving labor and improving the
split Efficiency, higher degree of automation.
a. Mainly used in electronics, electrical appliances, lighting,
medical care, new energy vehicles, automobiles and other electronic
technology industries;
